Technical Data Sheet of Pigment Green 7 for Plastic Masterbatch
PRODUCT DESCRIPTION
Color Index Name  Pigment  Green 7
Color Index Number (C.I. No.) 74260
Chemical Type / Class  Phthalocyanine
CAS No. 1328-53-6
EINECS Number  215-524-7
Molecular Formula  C32H16CuN8
Molecular Weight [gr/mol] 1030
   
PHYSICAL DATA
Appearance  Green Powder
Density  [gr /cm3] 1.8 - 2.5
Bulk Volume [ltr /kg] 2.5 - 4.5
Specific Surface [m2/ gr] 40 - 60
Oil Absorption [ml/100 gr] 35 - 445
PH of 10% Extract 6 - 8
Moisture Content  Max. 1%
   
FASTNESS PROPERTIES
Acid  5
Alkali 5
Water  5
Butanol  5
Butyl Acetate  5
Xylene 5
MEK 5
White Spirits  5
   
Light Fastness
Full Shade 8
1:1TiO2 8
   
Weather Fastness
Full Shade 5
1:1TiO2 5
   
STANDARD PACKAGING
15 - 20 KGS Paper Bag  
Also Packaging available as per your Convenience
   
COMMENT
Best grade with high flow, suitable for NC/PU/PA System
   
INDUSTRIAL REFERENCE  
HEUCO ® Green 600734 / 600735 / 736
 
   
STRUCTURAL FORMULA : PIGMENT GREEN 7
   
APPLICATION
Offset Heatset Recommended
Offset Coldset Recommended
Offset Sheetfed Recommended
Water (Resin free) Recommended
Flexo Aqueous Recommended
Metal Decorative Recommended
Publications Recommended
UV Recommended
PVB Recommended
NC/PA Recommended
NC/PU Recommended
NO Chips Recommended
Vinyl -
   
REGULATIONS
Germany BFR recom. IX Compliant 
AP 89/1 Compliant 
USA (FDA) 21 CFR 178.3297 Compliant 
Toys Europe EN 71-03 : 2013 Compliant 
CONEG, EC 94/62 Compliant 
ROHS,  2002/95/E, 2005/618/EC Compliant 
End of Life Vehicles, 2000/53/EC, 2002/525/EC Compliant 
   
CHEMICAL INVENTORY LISTING STATUS
All ingredients are listed in the following national chemicals
Inventories :  
EINECS [Europe], TSCA [USA], DSL (Canada), AICS [Australia], NZIoC [New Zealand], MITI [Japan], ECL [Korea], IECSC [China], PICCS [Philippines]
Note: Information given in this technical data sheet is based on current knowledge and our laboratory evaluation; it is presented as per our opinion without any guarantee. Buyers must carry out their own tests and experiments to determine the suitability and completeness of our products for their use and application.